Vegas - E-T

NEW 2022 VEGAS-E T
THE ULTIMATE IN A SPOT BOW with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND,
EASILY ADJUSTED TO FIT, AND IT WORKS!

The New Vegas-E T features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings. The Vegas-E-T has a 38-1/2” axle-to-axle dimension and an 7 7/8” brace height, with draw lengths available up to 32”. The reduced power stroke, resulting from the higher brace height, makes this bow an excellent choice when competing in tournaments where shooter fatigue can become an issue. With its 7 7/8” brace height and stellar level of performance, arrow time on the string is reduced to a minimum. If you want to shoot your very best, experience less shooter fatigue, enjoy over-the-top forgiveness and have over-all shoot-ability a priority, than the Vegas-E T should be your choice. 

SPECIFICATIONS:
SPEED: 310-315 FPS
AXLE-TO-AXLE: 38-1/2"
BRACE HEIGHT: 7 7/8"
MASS WEIGHT: 4.8 LBS.
DRAW LENGTHS: 26.5"-32"
DRAW WEIGHTS: 40, 50, 60, 70
LET-OFF:80% (adjustable)

NEW 2022 VEGAS-E 3D
STRAIGHT SHOT TO THE PODIUM!

THE ULTIMATE IN A 3D Shoot through Riser with NEW TECHNOLOGY FOR THE SHOOTER THAT IS EASY TO UNDERSTAND, EASILY ADJUSTED TO FIT, AND IT WORKS!

The New Vegas-E 3D features a redesigned riser and a new limb pocket design for better control of limb alignment and a more controlled shot along with our pateneted new E-System. The new Equalizer Cable System is the closest thing you can get to a totally balanced shooting system. The adjustable draw module, positive limb stops and assortment of draw stop tabs gives the shooter complete control of their draw length. The split yoke system that anchors on the axles, outboard of the limbs, totally equalize/stabilize the limbs and reduce the load on the cam bearings.

 The Vegas 3D limb length has been shortened, resulting in a lower brace height and an increase in its power stroke at all draw lengths, while retaining the desired balance of the Vegas. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Vegas. 

• 7075 Cams
• 1/4" Axles
• 5/8" Bearings
• .790 Limbs and Limb Pockets (Add Stability)
• New grip angle

SPECIFICATIONS:
SPEED: 325-330 FPS
AXLE-TO-AXLE: 37 1/2"
BRACE HEIGHT: 7”
MASS WEIGHT: 4.72 LBS.
DRAW LENGTHS: 25.5"-31"
DRAW WEIGHTS: 40, 50, 60, 70
LET-OFF: LET-OFF: 80% (adjustable)

2022 TEMPEST E T
The All NEW Tempest E T, featuring the E System Technology with draw lengths adjustable up to 31", is a long 37 -1/2" axle to axle bow with a 7-5/16" brace height. Finger shooters will find the reduced string angle a plus. The reduced power stroke, resulting from the higher brace height, and reduced let-down slope makes this bow an excellent choice when competing in tournaments where you're shooting a lot of arrows. If you want less shooter fatigue from a bow, but still want over-the-top- forgiveness, shootability, and performance, the Tempest E-T should be your choice. With its redesigned riser and limb pockets for a more controlled shot, things just keep getting better.

• ALL new Riser Design
• 7075 T-6511 Pre Stretched and Pre Stressed Riser! (little to NO Riser Flex)
• 7075 Cams
• 1/4" Axles
• 5/8" Bearings
• .790 Limbs and Limb Pockets (Add Stability)
• New grip angle
• SPECIFICATIONS:
  SPEED: 310-315 FPS \ AXLE-TO-AXLE: 37-1/4"
  BRACE HEIGHT: 7-5/16" | MASS WEIGHT: 5.2 LBS.
  DRAW LENGTHS: 26"-31" | DRAW WEIGHTS: 40, 50, 60, 70
  LET-OFF: 85% (adjustable)

ALL NEW 2022 TEMPEST E 3D
THE BEST OF ALL WORLDS!

Taking the successful Tempest E T design and focusing on more performance, the limb lengths are shorter resulting in a lower brace height and an increased power stroke at all draw lengths, and the draw cycle has been modified for a more aggressive draw cycle. This has produced more stored energy and better performance while retaining most of the shooting attributes of the Tempest E T. These changes have also made this bow better suited for the shorter draw archer that wants to shoot a Tempest. The bow will live up to all of your expectations.

• ALL new Riser Design
• 7075 T-6511 Pre Stretched and Pre Stressed Riser! (little to NO Riser Flex)
• 7075 Cams
• 1/4" Axles
• 5/8" Bearings
• .790 Limbs and Limb Pockets (Add Stability)
• New grip angle

Specifications:

Speed: 320-325 FPS | Axle to Axle: 36: | Brace Height: 6 1/2"
Mass Weight: 5.1 lbs. | Draw Lengths: 25" - 30"
Draw Weights: 40, 50, 60, 70 lbs. | Let-Off: 85% (adjustable)

ALL new 2022 TEMPEST E - 3D/LD
A BOW THAT FITS!

The Tempest E-3D/LD, featuring equalizer Technology for the longer draw archer that wants the shooting advantages the Tempest-E-3D offers. We have developed a new Cam that has adjustable draw lengths and stellar performance. The Tempest E-3D/LD provides a great 3D bow with draw lengths up to 33" long, great for that extra performance at the longer draw lengths.

***80%*** Mods shipped on bows being delivered to states that require 80% Let-Off or less

• ALL new Riser Design
• 7075 T-6511 Pre Stretched and Pre Stressed Riser! (little to NO Riser Flex)
• 7075 Cams
• 1/4" Axles
• 5/8" Bearings
• .790 Limbs and Limb Pockets (Add Stability)
• New grip angle

Specifications:

Speed: 320-325 FPS | Axle to Axle 35" | Brace Height: 6 7/8"
Mass Weight: 5.2 lbs. | Draw Lengths: 26.5"- 33"
Draw Weights: 40,50, 60, 70 lbs. | Let Off 85%