OMEN

BUILT FOR SPEED & STABILITY

The 2022 PSE Omen is more than a bow; it is a harbinger of great things to come. Achieving a new benchmark in energy transfer and efficiency, the 2022 PSE Omen shoots at blazing speeds of up to 356 feet-per-second, all while reducing the amount of energy needed from the shooter during the draw cycle. This is a speed bow that almost anyone can shoot, maximizing potential speeds at every draw weight and length, and delivering unparalleled performance at full draw.

Full Draw. This is where everything matters; it’s the difference between success and failure. That’s why the 2022 PSE Omen has been built on PSE’s Full Draw Stability Technology, providing the most stable shooting experience in archery thanks to its dynamic brace height. The Full Draw Stability system is designed to actively resist induced torque, resulting in increased accuracy when it matters most. One shot and you will feel the difference.

Engineered for peak performance with PSE’s wider and more robust E2 & S2 cams, the 2022 Omen maximizes energy efficiency and stability throughout each and every design component. This is the most stable, consistent, and solid shooting experience you’ll ever get from a speed bow. PSE believes that every bow should be a pleasure to shoot, even the fastest ones.

 MASS WEIGHT4.5 lbs

PSE OMEN (E2 | S2)

BRACE HEIGHT: 5 1/2″ | 6 1/4″

AXLE-TO-AXLE: 33”

ATA/IBO SPEED: 356 | 345

LETOFF: 80-90%

MASS WEIGHT: 4.5 LBS.

DRAW LENGTH RANGE:

27″ – 31″ | 24 1/2” – 28 1/2“

DRAW WEIGHTS (LBS.):

60, 70, 80 | 60, 70, 80

LIMB BOLT TURNS: 10

CAM: E2 | S2 – HL/LL MODS

Purpose built, 3.6 pounds, and tough as hell. Engineered to maximize every benefit high-performance carbon has to offer, every riser is meticulously hand laid by skilled craftsmen in the USA. Featuring PSE’s proprietary Dead Frequency Carbon layup, the LEVITATE is dead in your hand and ultra-quiet on the shot. It’s powered by the all-new wider based E2 Cam System featuring a brand new, unrivaled bearing design for ultimate stability and increased accuracy, reduced friction for a smoother feel, and faster speeds at all draw lengths.

The draw cycle and let-off have also been optimized at all draw lengths so regardless of your module position, expect maximized performance. Every single detail from the cable guard to bushings and axles to strings have been super tuned to create a bow that rises above them all.

 MASS WEIGHT3.6 lbs

DRAW LENGTH27.5" - 31.5"

DRAW WEIGHT60, 70, 80

SPEED348

AXLE TO AXLE32.25"

BRACE HEIGHT6" 

SE’s FDS (Full Draw Stability) system is designed to provide the most stable shooting experience possible by increasing effective brace height.

FDS Actively reduces torque, leading to increased accuracy when it matters most – at full draw.

• Allows for quick bow tuning and cam lean adjustment. Less time in the bow press, more time in the field.
• Spacers are easily removed and repositioned on a pressed bow. Allows cam shifts in precise 0.020 increments.
• Revolutionary axle system prevents overtightening of axle screws, a primary cause of bearing wear seen in competitor’s bows

• Machined Dovetail Plate for zero-tolerance QAD Integrate arrow rest.
• Machined Dovetail Plate can be removed, providing machined mounting holes for the Hamskea Epsilon arrow rest.

Mach 34
(E2 | S2 | EC)

BRACE HEIGHT:
7 1/8″ | 6 3/4″ | 7 1/4″

AXLE-TO-AXLE: 34”

ATA/IBO SPEED:
335 | 335 | 330

LETOFF: 80%-90% | 65-75%

MASS WEIGHT: 3.65 LBS.

DRAW LENGTH RANGE:

29″ – 33″ | 26 1/2″ – 33 1/2″ | 26 1/2” – 32″

DRAW WEIGHTS (LBS.):

50, 60, 70, 80

LIMB BOLT TURNS: 10

CAM: E2 | S2 | EC

FULL DRAW STABILITY SYSTEM

• PSE’s FDS (Full Draw Stability) system is designed to provide the most stable shooting experience possible by increasing effective brace height.
• FDS Actively reduces torque, leading to increased accuracy when it matters most – at full draw.

• Allows for quick bow tuning and cam lean adjustment. Less time in the bow press, more time in the field.
• Spacers are easily removed and repositioned on a pressed bow. Allows cam shifts in precise 0.020 increments.
• Revolutionary axle system prevents overtightening of axle screws, a primary cause of bearing wear seen in competitor’s bows

FORTIS 30
(E2 | EC2 | S2)

BRACE HEIGHT:
6 3/4” | 6 7/8″ | 6 1/2″

AXLE-TO-AXLE: 30”

ATA/IBO SPEED:
345 | 340 | 335 @29

LETOFF:
80-90% | 65-75% (Opt.)

MASS WEIGHT: 4.4 LBS.

DRAW LENGTH RANGE:

27 1/2″ – 31 1/2″ (E2)
25″ – 30 1/2″ (EC2)
25″ – 29″ (S2)

DRAW WEIGHTS (LBS.):

50, 60, 70, 80

LIMB BOLT TURNS: 10

CAM: E2 | EC2 | S2

FULL DRAW STABILITY SYSTEM

• PSE’s FDS (Full Draw Stability) system is designed to provide the most stable shooting experience possible by increasing effective brace height.
• FDS Actively reduces torque, leading to increased accuracy when it matters most – at full draw.

• Allows for quick bow tuning and cam lean adjustment. Less time in the bow press, more time in the field.
• Spacers are easily removed and repositioned on a pressed bow. Allows cam shifts in precise 0.020 increments.
• Revolutionary axle system prevents overtightening of axle screws, a primary cause of bearing wear seen in competitor’s bows

FORTIS 33
(E2 | EC2 | S2)

BRACE HEIGHT:
7” | 7 1/8″ | 6 3/4″

AXLE-TO-AXLE: 33”

ATA/IBO SPEED:
340 | 334 | 340

LETOFF:
80-90% | 65-75% (Opt.)

MASS WEIGHT: 4.6 LBS.

DRAW LENGTH RANGE:

28 1/2″ – 32 1/2″ (E2)
26″ – 31 1/2″ (EC2)
26″ – 30″ (S2)

DRAW WEIGHTS (LBS.):

60, 70, 80

LIMB BOLT TURNS: 10

CAM: E2 | EC2 | S2

FULL DRAW STABILITY SYSTEM

• PSE’s FDS (Full Draw Stability) system is designed to provide the most stable shooting experience possible by increasing effective brace height.
• FDS Actively reduces torque, leading to increased accuracy when it matters most – at full draw.

• Allows for quick bow tuning and cam lean adjustment. Less time in the bow press, more time in the field.
• Spacers are easily removed and repositioned on a pressed bow. Allows cam shifts in precise 0.020 increments.
• Revolutionary axle system prevents overtightening of axle screws, a primary cause of bearing wear seen in competitor’s bows

The 2021 PSE Drive NXT takes the highest-performing value hunting bow in archery to the next level. When you eye up your shot and are ready to fill that tag, you need a bow that delivers pro performance, no matter the cost. Thanks to the Drive NXT’s all-new machined aluminum riser design and ZF Quad-Track Cam System, this bow gives you upgraded stability and tunability far beyond that of previous Drive bows.

The Drive NXT also features a 33” Axle-to-Axle with a wide range of draw lengths, and boasts upper-tier NXT features, like PSE’s swappable ComfortGrip™ System, a lower stabilizer mount for more accurate shooting, and quick-disconnect sling mounts.

• BRACE HEIGHT: 7”
• AXLE-TO-AXLE: 33”
• ATA/IBO SPEED: 330-322 FPS
• LETOFF: 80%
• MASS WEIGHT: 4.3 LBS.
• DRAW LENGTH RANGE: 24”- 31”
• DRAW WEIGHTS (LBS.): 60, 70
• LIMB BOLT TURNS: 10
• CAM: ZF
• FINISHES: Mossy Oak Country, Kuiu Verde, Black

Also available in a Ready to Shoot Package (2143ZF) : Torment Quiver, Phantom Drop-Away Rest, Recon 6” Stabilizer, Sierra Micro 5 Pin Sight, PSE Neoprene Sling, 3/16” Aluminum Peep, Nocking Loop